My Solenoid, Arduino Select Fire Nerf Rapidstrike Mod (Part One)

This is my Solenoid, Arduino Selected Fire Nerf Rapidstrike Mod.

3D files can be found under my Thingiverse:


Arduino code can be found under my GitHub:


4 modes to power up with:

1. Low Power Traditional - Normal switch on
this mode is for low power games, lower FPS, mainly design for my son (whom is very young)
The traditional mode means, the blaster require normal revving via rev switch and the the 3-way selection switch is use to select: signal shot, burst fire or full auto.

2. High Power Traditional - press and hold the rev switch, then switch on the system

Max flywheel power with traditional mode.

3. Low Power V2 mode - press and hold the trigger switch, then switch on the system

Lower FPS which a mode I named V2. In this mode, a press of the trigger fires signal shot, a press of the rev, fires burst and pressing both trigger and rev together fires full auto, the revving of flywheel is automatic. In this mode the 3-way selection switch is used to select the no. of darts to fire for burst, 2, 3 or 4 darts per burst.

when the mag is out the darts capacity can be configured by pressing trigger to increase or rev to decrease.

ROF can be configure by:
switch on safety, press and hold the trigger. press the rev switch to select ROF

No. of burst can be configure by:
switch on safety, press and hold the rev. press the trigger switch to select number of darts for burst


Background Music from:

ONLAP:















Music from Soundcloud

Music provided by RFM:

nerf,nerf modding,nerf rapidstrike,rapidstrike,select fire nerf mod,select fire mod,